Can I get DTF transfers the same day in North Amityville?

We ship same day, we do not deliver same day. An order placed by 3 PM Eastern on a business day is printed, inspected, packed and handed to the carrier that same business day. Transit is separate: 2 to 5 business days standard, 1 to 3 expedited. If you need them sooner, local pickup at our Huntington facility is same business day after production, by appointment.

What does a full crew set of workwear transfers cost?

Standard DTF is $0.06 per square inch of the design's bounding box, with no minimum. A 4 by 3 inch chest logo is 72 cents, an 11 by 14 inch back panel is $9.24, and a 3.5 by 1.25 inch name strip is about 26 cents. Ten shirts with chest and back comes to $99.60 in transfers, which clears the $99 free shipping threshold.

Will DTF hold up on workwear that gets washed hard?

Applied to press spec, transfers are rated for 50 plus commercial wash cycles at 104 F. Spec is 300 to 325 F on cotton, 285 to 300 F on polyester, 10 to 15 seconds, medium-firm pressure. Under-pressing and a platen that reads hotter than it actually runs are the usual causes of early edge lift. Check yours with a surface thermometer.

Can I press these onto hi-vis polyester shirts?

Yes. Hi-vis tees are usually polyester, so use the 285 to 300 F band rather than the cotton band, 10 to 15 seconds, medium-firm pressure. Press a spare first and let it cool completely before you judge it. Dye movement on safety yellow and safety orange shows up after cooling, not while the transfer is still warm.

Do you deliver to North Amityville or do I have to ship?

Three ways. Free shipping on orders $99 and up in the contiguous US, 2 to 5 business days standard. Pickup at 205 E Main St, Ste 2-1, Huntington NY 11743, same business day after production, by appointment. And a $19.99 flat-rate local courier option that appears at checkout for eligible Long Island addresses, so check eligibility with your address at checkout.

Babylon, Suffolk County · 11701 · 11726

DTF Transfers for North Amityville Contractors and Work Crews

If you run a crew out of North Amityville, your print order is usually the same shape: a small chest logo, a big back panel, and a few names. We print DTF transfers at $0.06 per square inch of the design's bounding box, with no minimum. Order by 3 PM Eastern on a business day and it goes to the carrier that day.

Order DTF Transfers Price It First

What a crew set actually costs at six cents a square inch

Price is the bounding box of the design times $0.06. A 4 by 3 inch left chest logo is 12 square inches, so 72 cents. An 11 by 14 inch back panel is 154 square inches, so $9.24. That is $9.96 of transfer per hoodie. Ten hoodies comes to $99.60, which clears the $99 free shipping line on its own. A 3.5 by 1.25 inch name strip adds about 26 cents each. There is no minimum on standard DTF, so a two-shirt reorder for a new hire prices at the same rate per square inch as a fifty-shirt run.

Hi-vis polyester and heavy cotton do not press the same

Trade wardrobes split between heavy cotton hoodies and polyester hi-vis tees, and they want different heat. Cotton runs 300 to 325 F. Polyester runs 285 to 300 F. Both want 10 to 15 seconds at medium-firm pressure. Safety yellow and safety orange polyester are the garments most likely to give you trouble, so press one spare first, let it cool all the way down, and look for color creeping into the print before you run the whole box. Applied to spec, the transfer is rated for 50 plus commercial wash cycles at 104 F, which is the number that matters on workwear.

Gang sheets for repeat crew logos: you pay for the empty space

DTF gang sheets are 14 inches wide and priced at $0.06 per square inch of sheet area, the same rate as a single transfer. The difference is that the whitespace is billable too. A 14 by 36 sheet is $30.24. Pack 4 by 3 chest logos three across with the required 0.25 inch spacing and you fit eleven rows, so 33 logos, about 92 cents each. Order those same 33 as individual transfers and you pay $23.76. Sheets earn their keep when shapes are mixed, or when you want one sheet per truck instead of a stack of loose pieces. The auto-build packer does the nesting for you.

Headcount changed at lunch: the 3 PM Eastern cutoff

Crews turn over fast, and the reorder is usually small and urgent. Order by 3 PM Eastern on a business day and your transfers are printed, inspected, packed and handed to the carrier that same business day. That is the standard service on standard DTF, UV DTF and gang sheets, not an upgrade and not a fee. After 3 PM, or on a weekend or federal holiday, it ships the next business day. Production runs Monday to Friday. Same-day shipping is not same-day delivery: standard transit is 2 to 5 business days, expedited 1 to 3. Count backward from the Monday the crew needs them.

Hard hats, gang boxes and tumblers: UV DTF instead

Not everything a crew carries is fabric. UV DTF transfers at $0.10 per square inch stick to hard surfaces: hard hats, gang boxes, job site coolers, tumblers, clipboards, equipment cases. A 2 by 3 inch hard hat decal is 6 square inches, 60 cents. UV DTF gang sheets run 24 inches wide. UV DTF is a same-day product on the 3 PM cutoff. The specialty UV builds are not, because the cure and build stages add time: raised UV patches at $0.65 per square inch and dimensional UV graphics are 48 hours, leatherette patches and puff DTF are 72 hours and carry unit minimums.

Logo files, license numbers and strokes that survive a back print

Trade logos usually arrive as a JPG from whoever lettered the trucks, sitting on a white background. What we need is a 300 DPI PNG with a transparent background, sized at final print size. The free background knockout tool on the site clears the white box in your browser. Two things break on back panels specifically: hairline strokes and small type. Keep line weight at 1 point or heavier at final size, and set any license number or phone number large enough to read from across a driveway, since a 154 square inch back gives you the room. Price the box first with the per-square-inch calculator.

Who orders from North Amityville

General contractors and remodelers

Chest logo plus an 11 by 14 back panel on hoodies and tees, reordered two or three at a time as subs and new hires come on. No minimum means a two-shirt reorder is priced the same per square inch.

HVAC, plumbing and electrical service fleets

Small chest marks on service shirts, a readable back panel with the phone and license line, and UV DTF for van interiors, gang boxes and tumblers. Order by 3 PM Eastern and it ships that business day.

Site and landscaping crews in hot weather gear

Hi-vis polyester tees and long sleeves pressed at 285 to 300 F, plus 2 by 3 inch UV DTF hard hat decals at 60 cents each. Rated for 50 plus commercial wash cycles when applied to spec.

Shops decorating for trade accounts

Buy transfers by the gang sheet at $0.06 per square inch of sheet area, press to order, and hold no blank inventory. The auto-build packer nests mixed client logos at the 0.25 inch minimum spacing.

North Amityville questions

Can I get DTF transfers the same day in North Amityville?: We ship same day, we do not deliver same day. An order placed by 3 PM Eastern on a business day is printed, inspected, packed and handed to the carrier that same business day. Transit is separate: 2 to 5 business days standard, 1 to 3 expedited. If you need them sooner, local pickup at our Huntington facility is same business day after production, by appointment.
What does a full crew set of workwear transfers cost?: Standard DTF is $0.06 per square inch of the design's bounding box, with no minimum. A 4 by 3 inch chest logo is 72 cents, an 11 by 14 inch back panel is $9.24, and a 3.5 by 1.25 inch name strip is about 26 cents. Ten shirts with chest and back comes to $99.60 in transfers, which clears the $99 free shipping threshold.
Will DTF hold up on workwear that gets washed hard?: Applied to press spec, transfers are rated for 50 plus commercial wash cycles at 104 F. Spec is 300 to 325 F on cotton, 285 to 300 F on polyester, 10 to 15 seconds, medium-firm pressure. Under-pressing and a platen that reads hotter than it actually runs are the usual causes of early edge lift. Check yours with a surface thermometer.
Can I press these onto hi-vis polyester shirts?: Yes. Hi-vis tees are usually polyester, so use the 285 to 300 F band rather than the cotton band, 10 to 15 seconds, medium-firm pressure. Press a spare first and let it cool completely before you judge it. Dye movement on safety yellow and safety orange shows up after cooling, not while the transfer is still warm.
Do you deliver to North Amityville or do I have to ship?: Three ways. Free shipping on orders $99 and up in the contiguous US, 2 to 5 business days standard. Pickup at 205 E Main St, Ste 2-1, Huntington NY 11743, same business day after production, by appointment. And a $19.99 flat-rate local courier option that appears at checkout for eligible Long Island addresses, so check eligibility with your address at checkout.

Talk to someone about a North Amityville order

Call 631.458.3842 or email [email protected]. Pickup is by appointment at our Huntington shop.

Serving North Amityville

ZIP codes served: 11701, 11726
Township and county: Babylon, Suffolk County
Local courier: $19.99 flat rate, shown at checkout for eligible addresses
Pickup: By appointment at 205 E Main St, Huntington

Nearest communities we also serve

Everywhere we serve in Babylon