Nassau County, Nassau County · 11566
DTF Transfers for Merrick, NY Landscaping, Marine and Outdoor Crews
Landscaping, marine and outdoor service work destroys shirts. Crews in Merrick and the rest of Nassau County reorder constantly: new hires in spring, replacements by July, hoodies and hi-vis before the cold work starts. Long Island DTF Printing prints those transfers at $0.06 per square inch with no minimum, and an order placed by 3 PM Eastern on a business day ships that same day.
What a Merrick landscaping or marine crew actually orders
The standing order in this trade is small and repeated. Left chest logo on every shirt, full back on most, sometimes a sleeve mark or a first name. A 4 x 4 inch left chest is 16 square inches, so $0.96. A 12 x 14 inch full back is 168 square inches, so $10.08. Shirt fronts for a service company usually stay under 4 inches wide so a zip-up or a hi-vis vest can sit over them. Hoodies take the same two placements. Hats take a small 3.5 x 2 inch mark at $0.42, or a leatherette patch if you want the raised look.
Running the numbers on a twelve-person crew
Twelve shirts, left chest plus full back on each. That is $0.96 and $10.08 per shirt, so $11.04 a shirt and $132.48 for the set. No minimum applies, so you can order eleven or thirteen instead. That total clears $99, so shipping is free in the contiguous US. Add a 3.5 x 2 inch hat mark for the same twelve and you are adding $5.04. Pre-cut contour cutting is $0.29 per transfer if you want them trimmed to shape rather than weeding a square edge yourself. On twelve backs that is $3.48.
Gang sheets are a handling decision, not a discount
Standard transfers and DTF gang sheets both run $0.06 per square inch. The difference is what those six cents are measured against: a single transfer is priced on its own bounding box, a sheet is priced on the whole 14 inch wide sheet whether you fill it or not. A 14 x 36 inch sheet is 504 square inches at $30.24. Pack 3.5 x 2 inch hat logos three across with the required 0.25 inch spacing and you get sixteen rows, so 48 marks for $30.24, or $0.63 each. Ordered individually those same marks are $0.42. Sheets earn their keep when you want one file and one thing to cut from, not when you want the lowest unit price.
Pressing hi-vis polyester without scorching it
Most outdoor crew apparel is a poly or poly blend safety shirt, and polyester is the fussier of the two. Press polyester at 285 to 300 F, cotton at 300 to 325 F, both for 10 to 15 seconds at medium-firm pressure. Stay at the low end of the polyester range on bright safety colors. Applied to spec, these transfers hold 50 or more commercial wash cycles at 104 F, which matters when work shirts get washed five days a week for a season. Crystal white DTF runs the same $0.06 per square inch and is an option when a mark needs a dense white base on a dark shirt or jacket.
Trucks, trailers, hard hats and equipment cases
Apparel is half of it. UV DTF transfers apply to hard surfaces at $0.10 per square inch, so an 8 x 6 inch panel mark is $4.80 and a 3 x 2 inch hard hat decal is $0.60. UV DTF gang sheets run 24 inches wide. Die-cut vinyl stickers are $0.22 per square inch for toolboxes, coolers and helmets. If you want a raised, molded look on gear, raised UV patches are $0.65 per square inch and dimensional UV graphics are $0.10, both on a 48 hour build because the cure stages are additive. Leatherette hat patches are 72 hours with a minimum of 10 per shape and color.
The 3 PM cutoff and three ways to get it
Production runs Monday through Friday. An order in by 3 PM Eastern on a business day is printed, inspected, packed and handed to the carrier that same business day. That is the standard service, not a rush fee. After 3 PM, or on a weekend or federal holiday, it goes out the next business day. Same-day shipping is not same-day delivery: standard transit is 2 to 5 business days, expedited 1 to 3. Orders of $99 and up ship free in the contiguous US. You can also pick up at our Huntington facility by appointment the same business day after production, and a $19.99 flat-rate local courier option appears at checkout for eligible Long Island addresses.
Who orders from Merrick
Landscaping and lawn care crews
Spring hiring means shirts for people who were not on the roster in February. No minimum means you can print four for four new hires at $11.04 each rather than buying a case you do not need.
Marine service and boatyard operations
Haul-out and commissioning seasons run on short staff bursts. Order polo and hoodie transfers by 3 PM and they ship that business day, and UV DTF handles the hard-surface marks on toolboxes, storage racks and service carts.
Tree, fence and hardscape contractors
Full-back marks at 12 x 14 inches read from the street and from a bucket truck. At $10.08 per back plus $0.96 for a left chest, a ten-person crew set is $110.40 and ships free.
Pool, irrigation and seasonal outdoor services
Seasonal staff turn over fast and shirts do not come back. Reprint a handful at a time instead of holding inventory, and use the free gang sheet builder to keep hat marks and sleeve logos on one 14 inch sheet.
Merrick questions
- Can I get crew shirts printed and shipped to Merrick the same day I order?
- We ship same day, which is different from delivering same day. An order placed by 3 PM Eastern Monday through Friday is printed, inspected and handed to the carrier that business day. Transit is then 2 to 5 business days standard or 1 to 3 expedited. For faster, pick up in Huntington by appointment or check the $19.99 local courier option at checkout.
- Is there a minimum order for landscaping crew transfers?
- No minimum on standard DTF transfers, so a single 4 x 4 inch left chest at $0.96 is a valid order. Minimums exist only on a few specialty items: puff DTF at 10 units, custom UV DTF at a $35 order minimum, and leatherette patches at 10 per shape and color.
- Will DTF hold up on hi-vis safety shirts that get washed constantly?
- Applied to spec, transfers hold 50 or more commercial wash cycles at 104 F. Press polyester safety shirts at 285 to 300 F for 10 to 15 seconds with medium-firm pressure, staying near the low end on bright colors. Cotton runs hotter at 300 to 325 F for the same dwell and pressure.
- What file do you need for a logo that came off a truck wrap?
- A 300 DPI PNG with a transparent background, sized at final print size. If all you have is a flat JPEG from a sign shop or a vehicle wrap proof, run it through the free browser-based background knockout tool on the site first, then check the bounding box against the pricing calculator before you order.
- Can I put my logo on trailers, hard hats and toolboxes too?
- Yes, that is UV DTF at $0.10 per square inch for hard surfaces, or die-cut vinyl stickers at $0.22 per square inch. UV DTF gang sheets are 24 inches wide. Standard UV DTF ships same day under the 3 PM cutoff, but raised UV patches and dimensional UV graphics are 48 hours because of the cure stages.
Talk to someone about a Merrick order
Call 631.458.3842 or email [email protected]. Pickup is by appointment at our Huntington shop.
Serving Merrick
- ZIP codes served
- 11566
- Township and county
- Nassau County, Nassau County
- Local courier
- $19.99 flat rate, shown at checkout for eligible addresses
- Pickup
- By appointment at 205 E Main St, Huntington